Which electrode connectors should I use for the screen-printed electrodes? You can either work by dropcasting over the SPE or by immersing the SPE into solution:

1. With the aid of a micropipette just place a drop of 40-50 µL, covering the three electrodes (counter, reference and working) like in the attached image. For this purpose, you can use the DSC connector (see image below).









2. For working in solution you can use the CELL (picture below) with a volume of 5-8 ml covering the three electrode system in combination with cable CAST (when using a DropSens potentiostat) or cable CAC (when using any other equipment).